NI LabVIEW System Identification Toolkit V2.0 英文光碟正式版 (Labview系統認證模組)
碟片編號：CB2133
碟片數量：1片
銷售價格：200
瀏覽次數：12796
軟體簡介:
NI LabVIEW System Identification Toolkit V2.0 英文光碟正式版 (Labview系統認證模組)
內容說明:
Labview系統認證模組，提供兩個工具：基於raw資料的系統模組開發的助手和vis庫。
這兩個工具可以完成整個系統認證過程，從分析vis資料到確認認證模組。
運行需要 Labview v7.1 Pro。
The System Identification Toolkit provides two tools: an assistant
and a library of VIs for developing models of a system based on a
large set of raw data. Both tools enable you to complete the entire
system identification process from analyzing the raw data to
validating the identified model.
Without prior knowledge about programming in LabVIEW, you can use
the LabVIEW System Identification Assistant to identify and validate
linear time-invariant models of systems from empirical data. Using
the System Identification Assistant, you can load or acquire raw
data into the System Identification Assistant, preprocess the data,
estimate a model that describes the system, and then validate the
accuracy of the model. The System Identification Assistant has
windows in which you can immediately see the raw data, the
response data, the estimated model, the validation results, and
the mathematical equations that describe the model.
The System Identification Toolkit also provides VIs that you can
use to preprocess raw data from a dynamic system, build a
mathematical model that reflects the behavior of that system, and
validate the identified model. The System Identification VIs
enable you to customize a LabVIEW block diagram to achieve specific
goals. You also can use other LabVIEW VIs and functions to enhance
the functionality of the application. Unlike creating a project
with the System Identification Assistant, creating a LabVIEW
application using these VIs requires basic knowledge about
programming in LabVIEW.
