xyz軟體王

DVD28851--Autodesk Fabrication CADmep 2024.0.1 x64 工業設計建模軟體 英文破解版(DVD一片裝)
DVD29474--Autodesk InventorCAM Ultimate 2025 x64 (CAD/CAM軟體) 英文破解版(DVD一片裝)
DVD28858--Graitec Advance CAD 2024.1 x64 (CAD設計繪圖軟體) 英文破解版(DVD一片裝)
DVD29492--Cadence Fidelity Pointwise 2023.2.2 x64 計算流體力學(CFD)軟體 英文破解版(DVD一片裝)
DVDP4062--SolidCAM 2023 SP1 HF1 for SolidWorks 2018-2024 x64 (CAM軟體) 英文破解版(DVD9一片裝 此片售價200元)

軟體簡介:

Kellyware KCam v4.0.25 英文正式版(鑽床/銑床控制軟體)


安裝序號:
Name: BEAN
Serial: 0008-1115-081C


中文化說明:

內容說明:
KCam 4是一款為CNC設備而設計低成本的鑽床/銑床控制軟體，透過它的Gcode編輯畫面設計
你的工作路徑，或導入DXF、NC和PLT數據。由CAD軟體設計圖板再導入KCam 4，雙重切割深
度是為了保證在鑽銑後的外緣與洞，可省下多在正式操作前的練習。

英文說明:
KCam 4 Router/Mill software is designed to run low cost hobby CNC
equipment. Program your paths using the built in Gcode editor, or import
DXF, NC, and PLT files. Create signs and plates using your CAD software
and import your work into KCam. Dual cutting depth allows for holes and
outlines to be punched out after routing. No more drilling holes for
switches or cutting plates to size before engraving.

Engrave signs, make name tags, drill printed circuit boards, mill parts,
plasma cuts, plot pictures onto paper...

Here are a few of the key features:
- Load GM code files
- Import Excellon ASCII drill files (.NC)
- Import DXF files (.DXF)
- Import HPGL files (.PLT)
- Import Gerber files(.GB0)
- Edit/Write GM code files
- 3D Graphical Viewer w/ Zoom, Pan and Table Views
- Manual Jogging motor control
- Controller and Table setup features
- Supports Parallel Port (LPT) Stepper Motor Controllers
- Selectable Feed Rate
- Backlash Compensation
- Windows 95/98/NT/2000 32bit Software
- PCB Isolation conversion from Gerber(RS274X) files
- Constant Velocity Contouring
- Multiple Machine Setups